The Weil-McLain 94 Series cast iron, heavy-duty boiler is uniquely engineered for providing efficient heat for churches, apartments, offices, schools, as well as other institutional and commercial buildings. The Weil-McLain 94 is offered for steam or water in a total of 18 different sizes spanning from 1,763.5 MBH up to 6,060.9 MBH. You can elect to have your boiler as:
In addition to offering flexibility when it comes to fuel, the Weil-McLain 94 Series boasts multiple installation options. You can opt to have your system in individual sections or with sections assembled at the factory. You can also choose to have a completely packaged boiler that has been assembled and fire-tested at the factory.
And if you don’t know which option is best for your facility, the experts at ATI of New York can help. We are the authorized manufacturer’s representatives for Weil-McLain and offer their entire line of cutting-edge products, including the 94 Series boiler. Let’s take a closer look at a few key features of the Weil-McLain 94 Series boiler.
Because it’s pressurized for forced-draft firing, the 94 Series doesn’t need a chimney. Instead, this boiler operates with nothing more than a three foot vent situated on top of the roof.This forced-draft boiler:
The 94 Series Boiler’s Hydro Wall design has an innovative water-backed combustion area with water circulating around the firebox. The sidewalls and crownsheet help create a maximized surface for heat transfer.The Hydro Wall Design also:
With cast iron parts of the boiler not facing the ground, the tougher outer skin is left to protect against corrosion and rust.
Because the boiler’s combustion area is surrounded by water, the burners for flame retention do not need hot refractory for combustion. This enhanced feature of the 94 helps keep boiler costs low by saving on the combustion chamber materials and the labor required to install it. In addition, there are no future replacement costs.
Every port opening on the 94 boiler features a flexible elastomer sealing ring to help ensure a water-tight, permanent seal between the different sections. This unique sealing method is enhanced by the use of short draw rods to connect sections and help facilitate faster assembly of sections.As demonstrated in the illustration, the machined surface of the port opening manages the compression ratio of the sealing ring to create a critical water tight seal. The aligning lugs help ensure the sections are properly aligned during assembly. These lugs also permit positive locking of the sections.
Combined with an ultra-efficient three-pass design, the Weil-McLain 94 Series boiler has multiple uptakes working to:
By having higher velocities and a longer flue gas travel, the 94 Series boiler increases the absorption of heat of the alternate heating surfaces.
To simplify and streamline maintenance and cleanings, the No. 94 boiler boasts two large cleanout doors. These openings offer complete access to the center flueways for unencumbered cleanings. The frameless doors are hinged to a center plate, sealed with a rope and then confirmed to be air tight by the use of wing nuts. As an added measure, the six cleanout plates located on the front of the boiler are rope-sealed and offer quick access for easy maintenance.
The Series 94 boiler helps save on material costs and installation time by reducing the need for a separate return header. Condensate or return water enters through the center opening and is then channeled to the right or left port openings by interior vanes in the section.
By requiring only two or one tow supply outlets, the Series 94 reduces installation time. You’ll receive three types of supply outlets as standard equipment based on your boiler size:
The outlets do feature an integrated trap that separates the water from the air.
The Series 94 boiler can accommodate the installation of up to 8 tankless water heaters. When you choose to use multiple tankless water heaters, you’ll enjoy:
The Weil-McLain 94 Series boiler is nothing short of a modern marvel. And you can learn more about this cutting-edge boiler at ATI of New York. Our experienced, factory-trained sales engineers will get to know your facility’s needs and demands to ensure the 94 is the best potential solution.
Contact the experienced sales engineers of ATI of New York today.
